10-inch high-power ceiling subwoofer system is a complete low frequency ceiling subwoofer package. It is designed to augment the low frequency response of any EVID ceiling speaker. The package consists of bezel assembly, grille, rear enclosure, 10-inch loudspeaker and internal line-matching transformer. The loudspeaker utilizes 2nd order crossover network to provide
the correct bandpass frequency response for use with any EVID ceiling loudspeaker. It utilizes a transformer that offers a selection of 7.5 (70V only), 15, 30 or 60W delivered to the loudspeaker system using either 70 or 100V lines or 8 ohm bypass. Selection is via a convenient switch on the front baffle. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure is constructed from zinc-plated and heavy gauge steel. The rear enclosure with fiberglass damping material provides an optimum internal volume for extended low-frequency performance. A rear cover with provisions for a junction box fitting provides access to 4-pin terminal block that allows direct connection to the speaker with 12-gauge wire and provides full-range pass through to additional speakers. A tile bridge is included for safe suspension of the C10.1 ceiling systems in drop ceiling that uses mineral wool or other fiber-based ceiling tiles. They provide wide dispersion, high-efficiency, high-maximum output, ease of installation and wide-range reproduction of music.
Supplemental LF for ceiling systems
High-excursion woofer in ported enclosure for extended LF
Low pass network with overload protection
Integrated low loss matching transformer allows for either 70/100V or 8 Ohms operation
Front-panel mode/wattage selector
Internally damped heavy-gauge steel enclosure
Safe, easy installation with included tile bridge and mounting ring
White semi-gloss perforated grille
Complete package, requires no additional accessories
Loudspeaker Mount Type - Ceiling
Transformer Option - Yes
Loudspeaker Voltage - 70V
Loudspeaker Voltage - 100V
Spec Sheet available - Yes
Speaker Diameter (Driver):
12.60 in
Maximum Frequency Response (Bandwidth):
180 Hz
Maximum Frequency Response (Bandwidth):
0.18 kHz
Minimum Frequency Response (Bandwidth):
45 Hz
Minimum Frequency Response (Bandwidth):
0.05 kHz
100V Taps:
15, 30 or 60 Watt
70V Taps:
7.5, 15, 30 or 60 Watt
Power Handling:
150 Watt
Sensitivity:
94 dB
Maximum SPL (Sound Pressure Level):
120 dB
Transformer Option:
Yes
Chassis Size:
10 in (254mm)
Coverage (Conical):
180 °
Nominal Impedance:
8 ohms (transformer bypass)
LF Transducer:
10-inch polypropylene cone
Connector:
Phoenix type removable with screw terminals and loop-through, accepts 12-gauge wire
Enclosure Material:
Steel enclosure and UL94V-0 rated baffle and bezel
Grille:
Powder-coated steel
Color:
White
Peak Power:
600 Watt
Height:
11.90 in
Shipping Weight:
34 lbs
Product Weight:
15.50 lbs
EVID C8.2HC
- 8-inch Two-way Coaxial High Ceiling Loudspeaker System
EVID C8.2LP
- 8-inch Two-way Coaxial Ceiling Loudspeaker System