E Series also introduces a proprietary Rail Sensing Limiter (RSLTM) which greatly reduces signal clipping, ensuring high quality audio output at all times, with user configurable output thresholds of either Hi-Z (70 V) or Lo-Z (69.3 V peak). The highly innovative RSL switch circuit senses rail voltages and optimizes output for instantaneous load conditions. RSL settings also facilitate asymmetric loading of the channels, to optimize performance and efficiency from each individual unit - allowing the total available output power to be utilized unequally between the channels, and even allowing for mono use, with all power on a single channel. This makes it possible, for example, to drive a small sub on one channel and a number of 70 V distributed ceiling loudspeakers on the other.
High power density – 2 x 600 W in 1U
Certified Energy Star 2.1 compliant
Flexible – IntelliDrive delivers similar power per channel at 70 V,
2, 4, 8 and 16 ohms
Asymmetric loading
IDEEATM output stage based on patented Class D technology
High efficiency – Extremely low power consumption and
heat output
Auto-standby function - with power consumption < 1 W in
standby state
Exceptionally low cost of ownership over lifetime
RSL switch - Circuit senses rail voltage and optimizes output for
instantaneous load conditions
Efficient cooling – One temperature-controlled fan
Comprehensive circuit protection and fault indication
Amplifier Signal Type - Audio
Amplifier Type - Other
Warranty - Yes
Spec Sheet available - Yes
Maximum Frequency Response (Bandwidth):
40 kHz
Maximum Frequency Response (Bandwidth):
20000 Hz
Minimum Frequency Response (Bandwidth):
20 Hz
Minimum Frequency Response (Bandwidth):
0.02 kHz
Impedance:
20000 ohm
Number of Channels:
2
Number of Watts Per Channel:
600 Watt
Power Handling:
1200 Watt
Rack Units (Height):
1
Signal to Noise Ratio:
112 dB
Total Harmonic Distortion + Noise (THD+N):
0.10 %
AC Voltage:
265 Volts
Current Draw:
18 Amps
Depth:
10.87 in
Height:
1.73 in
Width:
19.02 in
Product Weight:
9.26 lbs
Color:
Black
Warranty (Length/Type):
3 Years
Max. Output Power Per ch. (all ch.’s driven):
2 ohms (Lo-Z mode):
600 W
4 ohms (Lo-Z mode):
600 W
8 ohms (70 V mode):
600 W
16 ohms (70 V mode):
310 W
70 V (70 V mode):
600 W
8 ohms (Lo-Z mode):
300 W
16 ohms (Lo-Z mode):
150 W
Performance:
THD at 1 kHz and 1 dB below clipping:
<0.05%
Channel separation (Crosstalk) at 1 kHz:
>70 dB
Frequency Response:
2 Hz - 40 kHz
Common Mode Rejection (CMR):
50 dB
Output Impedance:
25 mOhm
Gain, Sensitivity and Limiters:
Limit and gain switch (per channel):
2 pos: Lo-Z and 70 V
VPL for 70 V mode:
100 V
VPL for Lo-Z mode:
69.3 V
Sensitivity for 70 V out in 70 V mode:
4 dBu
Sensitivity for full power into 4/8/16 ohms in Lo-Z mode:
4 dBu
Gain in 70 V mode:
35.2 dBu
Gain in Lo-Z mode:
32 dB
Level adjustment (per channel):
Rear panel potentiometer, detented from -inf to 0 dB