The M Series represents a superb value from a premium brand with unparalleled efficiency, good for the environment and easy on the power bill. The size and weight is an absolute minimum thanks to the 1 U standard and the reduced depth of the equipment. M Series models are provided in two versions, M50Q and M28Q (four channels) and M30D, M20D and M14D (two channels). The two four channels models provide up to 1250W/ch on 4 ohm, while the three two channels models offer a maximum output of 1500W/ch on 4 ohm, while full range can reach up to 360W/ch on 8 ohm. The M Series provides Optional DSP modules hidden inside to prevent tampering with system settings. The M Series maintains the high professional class from small to medium applications of installed sound, stage monitors and portable sound.
Advanced switch-mode power supply technology for high performance and compact size
Fixed frequency switch mode output
Patented output filter with ripple cancellation network
Neutrik XLR balanced inputs with loop thru XLR and Speakon outputs connectors
Ac protection: shut down power supply when AC mains voltage is outside operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Thermal protection: when output devices reach 75 °C (167 °F) amplifier shut down outputs, they will unmute automatically when temperature will reach 65 °C (149 °F)
Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output.
Temperature controlled continous variable speed fan, front to back airflow
Dual 24-bit A/D & D/A with high dynamic range (114 dB(A)), 56 bit for internal processing and 1 ms fixed latency; separate input/output EQ's with numerous filters of various types up to 48 dB/oct; peak, RMS, and frequency dependent limiters, time alignment
Recessed stepped attenuators
Modular construction
Full three year warranty
Compact size - all models only 1 RU for reduced rack cost and space
Light weight - all models only 7.4 kg (16 pounds) for easier racking and shipping
Control and monitoring through Armonía Pro Audio Suite™
Interface available for MediaMatrix, Crestron and AMX control and monitoring systems. and monitoring systems
Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier
Warranty - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
167 F
Operating Temperature (Minimum):
149 F
Product Weight:
16.31 lbs
Warranty (Length/Type):
4 year
Certifications:
CE approved
Maximum Frequency Response (Bandwidth):
30 kHz
Maximum Frequency Response (Bandwidth):
30000 Hz
Minimum Frequency Response (Bandwidth):
10 kHz
Minimum Frequency Response (Bandwidth):
10000 Hz
Signal to Noise Ratio:
112 dB
Active Power:
38 Watt
Depth:
14.20 in
Height:
1.75 in
Width:
19 in
AC Voltage:
115/230 Volts
Multi-Channel mode(4ohm):
2x1000 W
Multi-Channel mode(8ohm):
2x600 W
Mono-Bridge mode(8ohm):
1x2000 W
Cooling:
Temperature controlled continuous variable speed fan, front to rear airflow
External Dimensions:
1 standard rack unit, 358mm deep (14,1 in)
Input Impedance:
10 kohm (balanced)
Slew Rate @ 8 ohm:
50V/ohm s input filter bypassed
Input sensitivity @ 8ohm:
1,34 V / 4,76 dBu
Damping Factor:
> 500 @ 100 Hz
Gain:
32 dB
THD+N:
< 0,05% from 0,1W to full power (typically <0,01%)
SMPTE IMD:
< 0,05% from 0,1W to full power (typically <0,01%)
S/N Ratio:
> 112 dB(A) (20 Hz – 20 kHz)
DIM100 IMD:
< 0,02% from 0,1W to full power (typically<0,005%)